Carry360 Adhesive Paper Towel Holder Under Cabinet Stick on Paper Towel Rack for Kitchen,Bathroom,Toilet, Drill Free, 304 SUS Stainless Steel

The media could not be loaded.  So, I read a lot of reviews that said this rack felt pretty cheap, but still got the job done, so I decided to give it a try. When it came, I followed the directions exactly, making sure the cabinet was clean and dry before placing the adhesive. Pushing the adhesive component so it was totally set against the cabinet surface, and waiting an hour at least before finishing installation (I finished installation almost two hours after applying the adhesive). That part was easy.Then, when I went to attach the rest of the design, it felt very loose and wobbly. The nuts that screw on are decorative domes, and not drilled all the way through. So you can only tighten them so much. You definitely should also use a wrench to tighten them, as just screwing them on with your fingers will not get them fully tightened. Even fully tightened, there was a significant gap between my cabinet, the metal of the holder, and the nut.I had read many reviews complaining that you have to tighten the nuts in between paper towel roll changes. I decided using a double sided tape to adhere some leftover tacky shelf liner to the back of the metal would not only close that wobbly gap, but also could hold the nuts on to the screws tighter so hopefully they wouldn't come loose with usage. I'm a firm believer in doing the job right the first time so hopefully it's as low maintenance as possible.So I gathered double sided tape, the shelf liner scrap, scissors, and the rest of the product. (See pictures and video for final result). I also had my ratchet wrench and 7mm bit for it handy still from the first, as-is installation. Then I went to work attaching all the components together. I had to clip away some of the shelf liner at the installation holes to ensure I could push the screws through the double sided tape and to use the nut. Then I popped on the whole piece. I used my ratchet wrench to fully tighten to nuts (again, you CANNOT just screw it on with your fingers, especially once the double sided tape is pushed into the screw treads). Now, not only does the whole thing feel incredibly secure, there is zero wobble against the bottom of the cabinet.It would be nice if the company lined the back of their units with foam so you wouldn't have to McGyver a solution like this. Then you could just use some plumber's tape on the screws to ensure the nut won't loosen during usage. I also think leaving the unit to wobble most likely exacerbates the loosening of the nuts. If the company foam-lined the back of the metal unit, it would make installation a lot faster. But now that I've done the job right, I expect this to be a very low maintenance holder for paper towels. And it's beautiful, with very simple lines, so it should look good in just about any kitchen. For the price, I don't mind the extra effort on my part to eliminate the wobble and ensure the nuts are fully tightened.Overall, I'm giving this a 5* rating because now that the installation is done, it seems very secure and like we'll be able to use it for years to come. Especially because the package came with an extra adhesive part, so if we end up moving or getting new cabinets, we'll be able to install it again! I hope my notes on the installation are helpful for other people who have had issues with this product, because it really is beautiful and functional.

It was super easy to install; it uses a very strong, wide strip of adhesive tape so you don’t have to worry about drilling into cabinets, etc. It looks alright, it’s mostly hidden under a cabinet. I got it bc I was trying to get a lot of junk off my countertops so I could have a more streamlined, neat looking kitchen.

Super easy installation! The mount sticks right to the bottom of the cabinet & has proven to be very sturdy. Once it is fully adhered you just attach the holder onto it by screwing in the bolts. So quick & easy & looks great! Only minor design flaw would be that it is kind of tricky to get the roll of paper towels on & off. I struggle with getting the rod that goes through the roll to actually slide into place on the mounted holder. Other than that, very satisfied!

I ordered this because of the no-damage mounting hardware for this paper towel holder. It was very easy to mount the sticky pad under the cabinet (I had to turn around, lean back and lay on the counter to see that i was mounting it straight). My only wishlist item is that this had a one-handed pull feature. I still give it 5 stars because that was not part of the description, but it would make this a perfect mounted paper towel holder. It wasn't a big issue until our baby learned that the towels would keep spinning out if she kept pulling on them. I got tired of rolling the towels back up, so I ended up using the rod from an Umbra one-handed mount. The hardware for the Umbra mount did not work with our cabinet, but the Umbra rod fit this mount. The Umbra rod is flattened, so it doesn't spin as freely as the original rod. Now we all can pull one towel at a time.

Had this for close to a couple years and worked great. Ended up having to remove it recently due to moving. Biggest pain ever. I would only buy again if I was in a permanent place.

Actually put this on the side of my refrigerator, textured surface, the adhesive strip seems to be holding well. I did take 1 star off because the caps for the little screws did not screw down all the was causing the holder to move when used. Had to use the old matchbook under the table leg trick to stop it from wobbling

So my order just arrived today and it was super easy to install! For all the people saying that the holder is loose or rattles once you screw it onto the adhesive, it shouldn't be. They give you 2 little plastic circles, like washers to put on before you screw the caps on. Once you tighten with the little wrench provided, it should be snug without moving. I'm only giving 4 stars because like I said, I just received it and put it up today, so I can't speak to usage and longevity.

Note that it has holes for the adhesive plate bolts, but those holes *can* also be used to attach it with traditional screws, as I preferred. It works well attaching to the underside of a cupboard rather than only onto a wall. Springy metal, but slightly flimsy. Also may not hold a “super” roll.

The ability to fit into any flat surfaces and secure using the supplied tape makes this a great product for anyone, it's simple to do. Most product's like this don't supply a second fitting tape,well done.