Ronlap Gate Wheels for Wooden Gate, Gate Caster Wheel Spring Loaded for Metal Tube Swing Gate Fence Gate Wheel for Gates Heavy Duty Outdoor Farm Vinyl Gate Rollers, 220 Lbs, Upgraded 4 Inches, Black

Great wheels!!! They are used for an exterior gate over a concrete driveway. They glide super smooth and work well. I opted for screws instead of the thru-bolts. The brake is a plus!

Great product! Resolved my sagging gate issue. Installation is pretty simple. Thank you.

Sencillo de instalar

Fuerte y duradera

works well for the intended purpose.

Taking off two stars because no instructions. Whyyyyy?!??! All in all it took me about 45’ to install. With instructions it could have been 15’.I struggled most with choosing the correct size drill bit and after some trial and error sizing up from 3/16” ended up using a 5/16”, which allowed the bolts to slip cleanly through. If you want the bolts to screw into the hole then go with a 1/4”. I don’t have a socket attachment for my drill and I wasn’t going to spend 40’ with a manual wrench threading 4 bolts through 4” of wood gate.Also to give the gate support from the wheel, I moved the bracket down about 1/4” from where I measured with the spring fully extended. For installation, I held the spring compressed about 1/2” with an adjustable wrench wedged between the spring bolt and the bracket. I’ve seen other folks recommend a clamp but I don’t have any so had to improvise.

The media could not be loaded. The sagging made the wood rub together making it almost impossible to open. Gate is only a year old and has already been adjusted and planed twice. The wheels are perfect to take enough weight off the hinges and separate the two gates. Now it’s a breeze to open and close! I wish I’d thought about this sooner.

These work as advertised. Built well, and was a fairly easy install. Too soon to know how these will weather. I coated the unpainted parts, bearings, axles, etc... with a light grease to help ward off rust.Our drive is sloped. There is about a 2" drop in the six foot length of the gate when opened. It takes up the full vertical travel of the wheel and it does not touch the concrete when the gate is opened... so the wheel locking is kind of worthless for holding the gate open. I have some 1/4" thick aluminum and I think I will glue or bolt a small 4"x4" pad to the concrete where the wheel rests when the gate is opened. This will give the wheel something to grip when the lock is engaged.