🚀 Elevate Your Fluid Game with BILITOOLS!
The BILITOOLS Transmission Fluid Transfer Pump is an advanced pneumatic vacuum extractor and dispenser designed for automotive professionals. With an 8L capacity and 15 ATF adapters, it offers a dual control mechanism for effortless fluid management. The robust design features a translucent tank for easy monitoring, while safety features like a pressure gauge ensure secure operation. Quick-fit connectors streamline setup, and the removable head unit simplifies maintenance, making it an essential tool for any workshop.
Manufacturer | BILITOOLS |
Brand | BILITOOLS |
Model | Fluid Extractor Dispenser |
Item Weight | 8.63 pounds |
Package Dimensions | 18.5 x 11 x 8.75 inches |
Country of Origin | China |
Item model number | B1G99039 |
Manufacturer Part Number | B1G99039 |
R**K
Great equipment
As described. Fast shipping. Clear instructions. Easy to use. Works perfectly. No mess!
J**.
Fast, no mss
Life saver on these new transmissions with no dip stick
G**K
Pump system
It is very well built. You will need an air compressor to operate this device.
C**A
Worth the price
Works well. A little loud. Definitely worth the money.
S**S
Leaks!!! Update!!! Leaks again!!!
This thing leaks at the hose shut off where the adapter click in! I paid good money for this and it just makes a mess! Easy to use but the performance of it is not worth this price!Update: after talking to the seller and describing the leak they decided to send me a whole unit! Talk about great customer service. All i asked for was for the hose that was leaking and they went out of their way send me a new unit! Best of all this one doesn't leak and works perfectly! Overall I am more than satisfied with my experience!Update number 2: After getting the replacement sent it all worked well for about a month. Then the leak started again.... Well at first it was minor and I paid no attention to it as it was very small. Once I was into half of the other month it started leaking bad! I don't understand why but this one leaks even more than the one I had replaced. Overall dissapointed although the customer service was great I can't say the same for their product. Makes me lose faith in buying any of their other products in fear of the same build quality.
S**G
Not bad ,only minor issues
I'am a do it yourselfer (DIY) with a 2023 Hyundai Santa cruz SEL AWD with a 2.5 non turbo. I'am doing all my own servicing which is relatively easy on this vehicle. The final drive and transfer case are extremely easy to service the transmission although not to bad does pose several minor inconveniences especially when working alone. This fluid transfer system was purchased in an attempt to address those issues. At first glance it would seem to be a big overkill to purchase this system . It would also seem a simple funnel would do the trick. the problem is the fill port on the trans is extremely small . Even a small funnel once inserted into the fill port leaves no space to vent the trans while filling. Due to the small opening and the constant burping up thru the funnel takes what seems forever to fill the trans. This fluid transfer system works extremely well in filling the trans. The small fill tube supplied allows pressurized fluid to be dispensed quickly yet allowing the Tran to vent . no mess and good fluid control. A few comments concerning the pump. ( likes) large capacity resivor. Well engineered pump assembly which screws on to the fluid bottle. nice selection of attachments and hoses. I have a small 4.5 gallon 200psi portable air compressor by Dewalt. (The kind roofers use to run nail guns.) This rather small compressor has no problem in the dispensing mode. (Dislikes) the bottle needs a base. The system is prone to tipping over especially with a air hose attached and low fluid levels. The quick disconnect fittings are difficult to use. Especially the small ones. Takes lots of pushing to get them to click in and lock. The suction mode is a real air hog. Have no need for this feature at present but experimented and was not impressed. Transfer suction rate was slow and the required air seemed extreme. All things considered taking into consideration the very reasonable price point this system is a winner.
V**.
Fantastic tool, with a catch
Worked as a dealer tech doing daily fluid services, and have used this quite a bit to great success. The pros are mainly that this thing works great... With the right air supply. Between some spare tubing and the provided attachments, this tool had no issues filling up the hardest to reach fill ports, and was strong enough to pull oil through a dipstick tube(only attempted a couple times, was slow). It performs virtually as well as expensive tool trucks and other performance brands.There are 3 downsides, many of which still apply to virtually all competitors. The lid can be a pain to get off, I never had too much issues but could see where a weaker person could struggle. It requires a fairly substantial air supply, a household "pancake" air compressor will not work and will only disappoint, in my experience constant 120psi was effective, probably over the rating. Lastly, the tube inside the tank that pumps oil from tank to application is not perfect and results in a small amount of fluid not being pumped out.
T**Y
Slow, need a big air compressor, short hoses
I bought this to change the oil on my 2019 Audi S5. The oil is 0w20 which is super thin. I have a medium sized air compressor - 10A 6 Gallon 2.6 SCFM @ 90 PSI. The operating range of the vacuum pump is 70 psi - 170 psi and I couldn't maintain 70 for more than 30 seconds. I did feather the valve and operated at about 55-60 psi after the oil started flowing. It took over an hour to extract 8 liters of oil. The hose for drawing the oil out the dipstick hole was too short for me to leave the pump sitting on the ground and I had to hold it up against the grill at an angle to reach all the way to the bottom of the oil pan. I'll probably keep using this on my Audi S5 and TT but I won't bother with my taller vehicles.
Trustpilot
2 days ago
2 weeks ago