Elite Screens 6" White Projector Screen L-Brackets, Single Metal Welded Construction, Wall or Ceiling Mount - Includes Hooks and Hardware, Model: ZVMAXLB6-W

The screws and attachment for my Elite Screen manual pull down is pretty weak compared to this attachment bracket. It made the installation SUPER easy - it took me a total of 15 minutes to install my screen. I drilled into studs for my installation so I did not use the drywall anchors that came with the product. The screen that these brackets are holding up is an Elite Screen 84" manual pull down. A few things to keep in mind with these L-brackets:1. Recommend using toggle bolts for drywalls instead of using the included dry wall anchors. They're the basic plastic anchors.2. It comes with 3 screws to attach for each bracket. The top screw is hard to get to with a power screwdriver. You're going to need a long neck phillips or attachment to your screwdriver. I ended up using a phillips with a 9" neck to screw in the top screw.3. You can adjust the attachment to the L-brackets to dictate the distance from the wall that you want your screen to protrude.I'd give it 4.5 stars due to the top screw being in such an awkward place to screw in. I hope this helps.

These brackets completely made my first ever DIY projector and screen set up experience so easy and enjoyable. I am writing this review almost one year since my purchase, because I wanted to see how the brackets held up over time. I can confidently say that they were well worth their price.Like many, I needed brackets that were customizable and allowed for easier mounting of my projector screen, where I could adjust it further forward, further back, up higher or down lower. I also needed these brackets because I was mounting a screen to drywall and felt that I needed something secure since I would be pulling down a screen constantly.These were easy to install and I loved being able to adjust the screen slightly to make it level and fit perfectly with the projector. After almost a year of daily use, the brackets hold up well to pressure of retracting.These brackets made my installation much easier than it originally was. I was (well still am I guess...) a novice to these types of things, but the set up turned out great. If you purchased a retractable projector screen, make sure these are part of your purchase.

Brackets came in handy and fit well

The brackets are solid and well designed. Depending on the weight of your screen and how you're choosing to mount them (wall or ceiling), the screws and drywall anchors may need to be substituted for something stronger.My install was a bit tricky because the I had to install them into the ceiling. I was able to screw one bracket into a stud, while the other had to be mounted into the drywall. My screen weighs 30ish lbs and when I tried using the supplied anchors they started pulling out of the ceiling immediately. Thankfully I had some heavy duty anchors/screws to replace them with and all was well.Final product looks great and I'm very happy with how it all turned out.

The brackets are sturdy, the fit and finish are good, and the mounting options are flexible. Mine came with wing nuts that are a couple of sizes smaller than what the eye hooks need; I think they used to sell these brackets with thinner hooks, and packed some of the old hardware. Fortunately, I'm not using the eye hooks in my application, so for me it didn't matter. Also, I managed to strip two of the mounting screws, they are made of pretty soft metal. I think these are an excellent solution for mounting a screen, just make sure you have a hardware store nearby just in case.

Awesome screen for the money. Have had no issues. I purchased 6" L brackets to hang and it works great. As some reviewers have stated, the metal hood of mine also came a little dented in a few spots, but it isn't much noticeable and does not have an affect on performance. The screen itself is quite good. Mine has some small waves, but it is impossible to notice once the lights are dimmed and the screen is on. People don't believe that it only cost $100, and it was a huge upgrade over projecting onto a painted wall. I use this with an Optoma 1080p projector and it fills up the screen fully.

Okay they're a bit' pricey. I'm sure your thinking well how hard can it be to mount a 100"-120" projector screen and have it perfectly level - now try doing that with one person. These brackets make adjusting/mounting a breeze. BTW you do not need an Elite Projector screen for these brackets to work. I'd say they'd work with virtually any screen with two hooks on each end. For me personally these brackets enabled me (One Person) to do the mounting of a 120" screen by myself with no fuss, and believe it or not looked great/professional. I'm not to fond with the look of a simple anchor in the wall. I would say these beat the simple anchor hook either in the wall or ceiling - In my opinion.

Very heavy duty, seem to work well with my heavy 120" 4:3 Elite Screens SRM Pro screen (though I'm continuously surprised the end caps on those screens are just plastic).A tip for those who want the screen to sit as flush with the top of the bracket as possible: use U-bolts through the loop on the projector end caps, then with 2 metal washers on the top of the brackets over the U-bolt legs, followed by a couple of nuts on each leg. I got these and just did not use the middle insert (plus used extra washers): https://www.amazon.com/gp/product/B01N0LF2A1/